RenGel® EP gelcoats
Please note that not all products are available in every country. Please use our sales contact search for each individual product under section „sales Partner“.
OBO-Werke GmbH are Master Distributor for Huntsman Advanced Materials for tooling products in Europe.
RenGel®, RenCast®, RenLam®, RenLease®, RenPim®, RenShape® and Ren® are either property of or licensed to Huntsman Corporation or an affiliate thereof in one or more, but not all, countries. RenPaste™ indicates a trademark of Huntsman Corporation or an affiliate thereof.
The technical data relating to the material and its processing has been compiled carefully and is correct to the best of our knowledge. The information cannot, however, be taken to be legally binding nor as any commitment that the material has certain properties or is suited for any particular purposes. Please see brochure.
RenGel® P 99greyRen® HY 5159grey
 Ren® HY 5159 0.8kg |  RenGel® P 99 2.2kg |
Properties
- Strong interlayer adhesion between gelcoat and backing materials
- Good mechanical strength
Application
- Coupling coat between gelcoat and backing
RenGel® SV 410whiteRen® HY 2404white
 Ren® HY 2404 50g |  Ren® HY 2404 1kg |  RenGel® SV 410 7.15kg |  RenGel® SV 410 0.36kg |
Properties
- Chemical resistant
- Polishable
- Abrasion resistant
Application
- Jigs
- Foundry patterns
- Laminating moulds
- Working models for the ceramic industry
RenGel® SV 412whiteRen® HY 2404white
 Ren® HY 2404 50g |  HY 2404 1kg |
Properties
- Good strength over sharp edges
- Machinable
- Polishable
Application
- Jigs
- Foundry patterns
RenGel® SW 419-1blackRen® HY 2419black
 RenGel® SW 419-1 13.5kg |  RenGel® SW 2419 1.8kg |
Properties
- Abrasion resistant
- Hard, but easy to machine
Application
- Sheet metal tools
- Foundry patterns
- Models and tools
RenGel® SW 10whiteRen® HY 2404whiteRen® HY 5159white
 Ren® HY 2404 50g |  Ren® HY 2404 1kg |  Ren® HY 5159 0.8kg |  RenGel® SW 10 3kg |
Properties
Easily machinable
Polishable
Low odour
Application
Negative moulds
Jigs
Pattern tools for the ceramic industry
RenGel® SW 18greenRen® HY 2404greenRen® HY 5159green
 Ren® HY 2404 50g |  Ren® HY 2404 1kg |  Ren® HY 5159 0.8kg |  RenGel® SW 18 5kg |  RenGel® SW 18 0.25kg |
Properties
- Good chemical resistance
- Polishable
- Heat resistant after temper process
Application
- Vacuum forming tools
- RTM moulds
- Polyester moulds
RenGel® SW 56caramelRen® HY 2404caramelRen® HY 5159caramel
 RenGel® SW 56 7.7kg |  RenGel® SW 56 385g |  Ren® HY 2404 50g |  Ren® HY 2404 1kg |  Ren® HY 5159 0.8kg |
Properties
- Chemical resistant
- Polishable
- Heat resistant after temper process
Application
- Vacuum forming tools
- RTM moduls
- Polyester moulds
- Foaming moulds
- Pattern tools for the ceramic industry
RenGel® SW 404blueRen® HY 2404blueRen® HY 5159blue
 RenGel® SW 404 0.5kg |  RenGel® SW 404 10kg |  Ren® HY 2404 50g |  Ren® HY 5159 0.8kg |
Properties
- Very good mechanical strength and qualities
- Good chemical resistance
- Very hard abrasion resistant surface
Application
- Foundry patterns
- Copy-milling models
- Foaming and concreate-casting moulds
- Tools and tooling aids
RenGel® SW 5155greyRen® HY 5159grey
 RenGel® SW 5155 10kg |  Ren® HY 5159 0.8kg |
Properties
- Good strength over sharp edges
- Heat resistant
Application
- Vacuum deep-drawing tools
- Foam and laminate lay-up tools
RenGel® SW 5200blackRen® HY 5158blackRen® HY 5211 (langsam)blackRen® HY 5212 (schnell)blackRen® HY 5213black
 RenGel® SW 5200 5kg |  Ren® HY 5158 1kg |  Ren® HY 5211 20kg |  Ren® HY 5212 20kg |  Ren® HY 5213 20kg |
Properties RenGel® SW 5200
- Very high temperature resistance after post curing
Properties Ren® HY 5211, Ren® HY 5212
- Very high temperature resistance after post curing
- Very long pot life with variable speed of cure control
Properties Ren® HY 5213
- High temperature resistance after post curing
Application Ren® HY 5158
- Prepreg tools
Application Ren® HY 5211, Ren® HY 5212
- Prepreg tools
- Very large tools
- Tools requiring heat resistance
Application Ren® HY 5213
- Prepreg tools
- Tools requiring heat resistance
XD 4558blueRen® HY 2404blue
 XD 4558 10kg |  Ren® HY 2404 50g |  Ren® HY 2404 1kg |
Properties
- Covers sharp edges
- Very strong edge strength
- Very hard and abrasion-resistant
Application
- Foundry patterns
- Copy-milling models
- Foaming moulds
- Concrete-casting moulds
XD 4615blackRen® HY 5159blackRen® HY 5212black
 XD 4615 5kg |  Ren® HY 5159 0,8kg |  Ren® HY 5212 20kg |
Properties
- Highly polishable
- High surface quality
- Heat resistance after post curing
- Excellent inter layer adhesion to epoxy infusion systems
Application
- RTM moulds
- Moulds for vacuum infusion
- Vacuum deep-drawing tools
- Foaming moulds