RenGel® EP gelcoats
Please note that not all products are available in every country. Please use our sales contact search for each individual product under section „sales Partner“.
OBO-Werke GmbH are Master Distributor for Huntsman Advanced Materials for tooling products in Europe.
RenGel®, RenCast®, RenLam®, RenLease®, RenPim®, RenShape® and Ren® are either property of or licensed to Huntsman Corporation or an affiliate thereof in one or more, but not all, countries. RenPaste™ indicates a trademark of Huntsman Corporation or an affiliate thereof.
The technical data relating to the material and its processing has been compiled carefully and is correct to the best of our knowledge. The information cannot, however, be taken to be legally binding nor as any commitment that the material has certain properties or is suited for any particular purposes. Please see brochure.
RenGel® SV 410whiteRen® HY 2404white
Ren® HY 2404 50g | Ren® HY 2404 1kg | RenGel® SV 410 7.15kg |
Properties
Chemical resistant
Polishable
Abrasion resistant
Application
Jigs
Foundry patterns
Laminating moulds
Working models for the ceramic industry
RenGel® SV 412whiteRen® HY 2404white
Ren® HY 2404 50g | HY 2404 1kg |
Properties
- Good strength over sharp edges
- Machinable
- Polishable
Application
- Jigs
- Foundry patterns
RenGel® SW 419-1blackRen® HY 2419black
RenGel® SW 419-1 13.5kg | RenGel® SW 2419 1.8kg |
Properties
- Abrasion resistant
- Hard, but easy to machine
Application
- Sheet metal tools
- Foundry patterns
- Models and tools
RenGel® SW 10whiteRen® HY 2404whiteRen® HY 5159white
Ren® HY 2404 50g | Ren® HY 2404 1kg | Ren® HY 5159 0.8kg | RenGel® SW 10 3kg |
Properties
Easily machinable
Polishable
Low odour
Application
Negative moulds
Jigs
Pattern tools for the ceramic industry
RenGel® SW 18greenRen® HY 2404greenRen® HY 5159green
Ren® HY 2404 50g | Ren® HY 2404 1kg | Ren® HY 5159 0.8kg | RenGel® SW 18 5kg | RenGel® SW 18 0.25kg |
Properties
- Good chemical resistance
- Polishable
- Heat resistant after temper process
Application
- Vacuum forming tools
- RTM moulds
- Polyester moulds
RenGel® SW 56caramelRen® HY 2404caramelRen® HY 5159caramel
RenGel® SW 56 7.7kg | RenGel® SW 56 385g | Ren® HY 2404 50g | Ren® HY 2404 1kg | Ren® HY 5159 0.8kg |
Properties
- Chemical resistant
- Polishable
- Heat resistant after temper process
Application
- Vacuum forming tools
- RTM moduls
- Polyester moulds
- Foaming moulds
- Pattern tools for the ceramic industry
RenGel® SW 404blueRen® HY 2404blueRen® HY 5159blue
RenGel® SW 404 10kg | Ren® HY 2404 50g | Ren® HY 5159 0.8kg |
Properties
Very good mechanical strength and qualities
Good chemical resistance
Very hard abrasion resistant surface
Application
Foundry patterns
Copy-milling models
Foaming and concreate-casting moulds
Tools and tooling aids
RenGel® SW 5155greyRen® HY 5159grey
RenGel® SW 5155 10kg | Ren® HY 5159 0.8kg |
Properties
Good strength over sharp edges
Heat resistant
Application
Vacuum deep-drawing tools
Foam and laminate lay-up tools
RenGel® SW 5200blackRen® HY 5158blackRen® HY 5211 (langsam)blackRen® HY 5212 (schnell)blackRen® HY 5213black
RenGel® SW 5200 5kg | Ren® HY 5158 1kg | Ren® HY 5211 20kg | Ren® HY 5212 20kg | Ren® HY 5213 20kg |
Properties RenGel® SW 5200
- Very high temperature resistance after post curing
Properties Ren® HY 5211, Ren® HY 5212
- Very high temperature resistance after post curing
- Very long pot life with variable speed of cure control
Properties Ren® HY 5213
- High temperature resistance after post curing
Application Ren® HY 5158
- Prepreg tools
Application Ren® HY 5211, Ren® HY 5212
- Prepreg tools
- Very large tools
- Tools requiring heat resistance
Application Ren® HY 5213
- Prepreg tools
- Tools requiring heat resistance