RenCast® EP casting resins
Please note that not all products are available in every country. Please use our sales contact search for each individual product under section „sales Partner“.
OBO-Werke GmbH are Master Distributor for Huntsman Advanced Materials for tooling products in Europe.
RenGel®, RenCast®, RenLam®, RenLease®, RenPim®, RenShape® and Ren® are either property of or licensed to Huntsman Corporation or an affiliate thereof in one or more, but not all, countries. RenPaste™ indicates a trademark of Huntsman Corporation or an affiliate thereof.
The technical data relating to the material and its processing has been compiled carefully and is correct to the best of our knowledge. The information cannot, however, be taken to be legally binding nor as any commitment that the material has certain properties or is suited for any particular purposes. Please see brochure.
RenCast® CW 20blueRen® HY 49blue
![]() RenCast® CW 20 20 kg | ![]() Ren® HY 49 1kg |
Properties
Very good mechanical strength
Good chemical resistance
Very hard abrasion-resis-tance surface
Application
Foundry patterns and copy-milling models
Sheetmetal pressing tools
Foaming and concrete casting moulds
RenCast® CW 47greyRen® HY 33grey
![]() RenCast® CW 47 25 kg | ![]() Ren® HY 33 3.75 kg |
Properties
- Excellent heat resistance up to 120°C after post-curing
- Long pot life
- Layers of up to 100 mm can be cast in a single operation
Application
- Vacuum forming tools
- Injection moulds for thermoplastics
- Tools for manufacturing prepreg components up to 120°C
- Foam tooling
RenCast® CW 61greyRen® HY 97 bluegreyRen® HY 97-1 BDgrey
![]() RenCast® CW 61 10 kg | ![]() Ren® HY 97 blau 1 kg | ![]() Ren® HY 97-1 BD 20 kg | ![]() Ren® HY 97-1 BD 5 kg |
Properties
- Chemical resistant
- Temperature resistance up to 110°C
- High strength at demould
- Easily machinable
Applications
- Vacuum forming tools
- Foam moulding tools
- Tools for prepreg lamination
RenCast® CW 2215yellowRen® HY 5160yellowRen® HY 5161yellowRen® HY 5162yellow
![]() RenCast® CW 2215 0,75kg | ![]() RenCast® CW 2215 10kg | ![]() Ren® HY 5160 20 kg | ![]() Ren® HY 5160 2 kg | ![]() Ren® HY 5161 20 kg | ![]() Ren® HY 5161 2 kg | ![]() Ren® HY 5162 20 kg | ![]() Ren® HY 5162 2 kg |
Properties
- Suitable for full or face castings
- Cures at room temperature
- Layers up to 80 mm thick can be cast in a single operation
- After curing very good machinable
Applications
- Construction of foundry patterns
- Jigs and fixtures
- Working models for the ceramic industry
- Suitable for a wide range of applications
RenCast® CW 2215yellowRen® HY 5160-1yellowRen® HY 5161-1yellowRen® HY 5162-1yellow
![]() RenCast® CW 2215 0,75kg | ![]() RenCast® CW 2215 10kg | ![]() Ren® HY 5160-1 20 kg | ![]() Ren® HY 5160-1 2 kg | ![]() Ren® HY 5161-1 20 kg | ![]() Ren® HY 5161-1 2 kg | ![]() Ren® HY 5162-1 20 kg | ![]() Ren® HY 5162-1 2 kg |
Properties
Suitable for full or face castings
Cures at room temperature
Layers up to 80 mm thick can be cast in a single operation
After curing very good machinable
Applications
Construction of foundry patterns
Jigs and fixtures
Working models for the ceramic industry
Suitable for a wide range of applications
RenCast® CW 2418-1blackRen® HY 5160blackRen® HY 5161blackRen® HY 5162black
![]() RenCast® CW 2418-1 1 kg | ![]() RenCast® CW 2418-1 13,5 kg | ![]() Ren® HY 5160 20 kg | ![]() Ren® HY 5160 2 kg | ![]() Ren® HY 5161 20 kg | ![]() Ren® HY 5161 2 kg | ![]() Ren® HY 5162 20 kg | ![]() Ren® HY 5162 2 kg |
Properties
- Hard abrasion resistant surface
- Easily machinable
- Cures at room temperature
- Layers up to 80 mm thickness can be cast in a single operation
- Cure rate determined by choice of hardener
Applications
- Sheet metal tools
- Casting of dowel bushes
- Full and face casting
- Foundry patterns and copy-milling models
- Mould making in general
RenCast® CW 2418-1blackRen® HY 5160-1blackRen® HY 5161-1blackRen® HY 5162-1black
![]() RenCast® CW 2418-1 1 kg | ![]() RenCast® CW 2418-1 13,5 kg | ![]() Ren® HY 5160-1 20 kg | ![]() Ren® HY 5160-1 2 kg | ![]() Ren® HY 5161-1 20 kg | ![]() Ren® HY 5161-1 2 kg | ![]() Ren® HY 5162-1 20 kg | ![]() Ren® HY 5162-1 2 kg |
Properties
Hard abrasion resistant surface
Easily machinable
Cures at room temperature
Layers up to 80 mm thickness can be cast in a single operation
Cure rate determined by choice of hardener
Applications
Sheet metal tools
Casting of dowel bushes
Full and face casting
Foundry patterns and copy-milling models
Mould making in general
RenCast® CW 5156-1greyRen® HY 5158greyXB 5173 grey
![]() RenCast® CW 5156-1 12.5 kg | ![]() XB 5173 Hardener 4.5 kg | ![]() Ren® HY 5158 bd 1kg |
Properties
- Low viscosity
- Long pot life
- Precure at room temperature
- No disturbing odours
Applications
- Construction of vacuum deep-drawing and foam moulding tools
- Construction of heat resistant moulds and tools